ATEX Category 2 - Dust Zone 21 & 22 - Gas Zone 1 & 2

*Requires Compressed Air System*

• A robust and low maintenance vacuum with very little to go wrong thanks to the fact that they have no electrical components or rotating parts.

Find out more about ATEX Certified machines here.

Compare Kerstar's ATEX Certified vacuum cleaner range here.

Description

This range of industrial vacuum cleaners is available in dry pick up only versions or wet & dry versions that can be converted to pick up dry dust and debris or non-flammable and non-corrosive liquids. All models are suitable for Dust Zone 21 & Gas Zone 1. Units are supplied on a stainless steel caddy with braked castors and conductive wheels where applicable and all models are fully earth bonded and have an anti-static (conductive) vacuum and air supply hose. Every vacuum cleaner is individually tested and provided with its own test certificate for earth path continuity. 

Includes 38mm D1 AS Dry Vac Anti Static Toolkit. (dry models)

Includes 38mm WD1 AS Dry Vac Anti Static Toolkit. (wet & dry models)

FILTRATION
1st Stage Disposable microfibre bag
2nd Stage Anti-static (conductive) cloth filter

Wet & Dry Models are supplied with a Conductive ball type float shut-off assembly.

Please note power requirement - Do you have sufficient compressed air to spare?
Optimum performance is achieved at an air input pressure of 90-120psi (6.2-8.3 Bar)

Specification

Max Airflow 120 m³/h, Max Vacuum 2,500 mm/WG.

Max Airflow 120 m³/h, Max Vacuum 2,500 mm/WG.

ATEX Category 3 - Dust Zone 22

• Designed to pick up combustible dust and debris.

Find out more about ATEX Certified machines here.

Compare Kerstar's ATEX Certified vacuum cleaner range here.

Kerstar’s KEVA range has been purposely designed to pick up potentially explosive and conductive dust and debris in a Dust Zone 22. All models are built using an electronically commutated brushless motor featuring soft start and thermal protection. Each model in the range is equipped with three stages of filtration on the negative pressure (suction) side of the motor. Every model is supplied ready for use with a fitted plug, comprehensive instruction book and a full conductive toolkit.

Includes 38mm D1 AS Dry Vac Anti Static Toolkit.

FILTRATION
1st Stage Microfibre disposable bag with sealing cap
2nd Stage Conductive fabric filter assembly

FEATURES
• Supplied with full 38mm conductive toolkit
• Hose length 3 metres. Longer hoses available
• All models use stainless steel canister
• Cable length 10 metres
• Fitted plug
• All models supplied with 5 x microfibre burst resistant disposable bags

Specification