Genuine Kerstar K4 microfibre bags (pack of 5).

Dimensions of bag (laid flat) 70cm x 53mm - Ø hole diameter approx 58mm

Suitable for the following models:

KV18, KV25, KV30, KV45, KV45/1, KV50, KV50/1, KV50/2
KV18H, KV20H, KV25H, KV30H, KV45H & KV50H, KV50/1H, KV50/2H
KAV18, KAV20, KAV30 & KAV45
KAV18H, KAV18H, KAV20H, KAV30H & KAV45H 
KEVA20, KEVA30 & KEVA45
KEVA20H, KEVA30H & KEVA45H

Pack of 10 disposable bags for the Pacvac Superpro range.

Bags are a conical shape that fit perfectly over the grey filter dust bag and accommodate the Hypercone filter.

The use of bags is always recommended as not only do they collect any unwanted debris, the act as another level of air filtration which in turn protects the motor from finer dusts.

(These were formerly packed in 5's using part number AF101/ DUB019)

White 300ml Flairosol fine atomiser spray bottle.

Ideal for creating a fine misting spray.

Perfect for use with any cleaning chemical or even just water. 

Pack of 10 non original Microfibre Dust Bags.

Genuine Kerstar K1 paper bags (pack of 10).

Suitable for the following models: Prima, KV10, KV15H, KAV15, KAV15H

Ametek carbon brush to suit IPC Soteco & Mastervac Motors

sold individually

carbon dimensions;
width 11.1 mm
height 6.1mm
length (new) 28.8mm

metal casing length 42.5mm

Genuine Pacvac Superpro 700 18 metre mains cable suitable for the Pacvac superpro 700.
Cable has a right angled IEC plug.
For Pacvac products, this extra long mains cable means you can reach much further without the need to unplug and move - more time vacuuming to get the job done faster!

See other Pacvac Spares and Accessories.

From July 2021 a cable holder will be sent with every new cable - please see here how to attach new pacvac cable holder

Old code - KC108ukIEC

Tls76 32mm crevice tool black -to fit most 32mm machines - electolux, vax, premiere, nilfisk, truvox

approach with caution as this man drinks Madri-Top (i know that is strange but it's god's honest truth).

he is from the west midlands (that is true too)

he is a great footballer (ok that was a lie, sorry)

Non-original tool end hose cuff compatible with Truvox, Nilifsk & Numatic 32mm hoses and HSE79.

Genuine Lindhaus L4 upright paper bags & filters.

Pack contains 10 paper bags, 2 exhaust filters and 1 motor filter. 

Suitable for all Lindhaus Ch Pro, Healthcare Pro, RX & Eco Force models. 

Suits Lindhaus VM300, VM380, VM450 & VM500 models. Previously LHA01

Genuine Kerstar K1 microfibre bags (pack of 5).

Suitable for the following models:

Genuine Numatic brushbar kit including cap. Suitable to fit the NQ100 Numatic, Henry & Hetty Quick stick vacuum.

This upholstery nozzle fits onto the 30g3 hose suitable for the DC100 (formerly BG10)

Genuine Pacvac Floor Tool. Compatible with any 32mm diameter vacuum cleaner wand or rod. Lightweight allowing easy manoeuvring for a thorough clean. For use on both low pile carpeted surfaces and hard floors. Branded Wessel tool.

Supplied as standard with both the Superpro & Velo Cord

• Compatible with any 32mm diameter vacuum cleaner wand/rod.

• Lightweight allowing easy manoeuvring for a thorough clean.

• For use on both low pile carpeted surfaces and hard floors.

• Branded Wessel tool.

Old Code: UA908W

Genuine Numatic 601144 32mm dusting brush - suitable for all Numatic 32mm machines including Henry & Hetty.

The diameter of the brush is 65mm

(previous code nva44b)

Genuine Numatic velcro strip for the underneath of floor tools, perfect for collecting lint and litter.

not suitable for the tools supplied with the HVR160 

Genuine Pacvac Hose suitable for Pacvac Superpro range - 1.2 metre length with screw cuff.

See our full range of Pacvac Spare Parts

An ideal accessory or replacement to add to your Pacvac

Old codes HOA001 & KC320

Single replacement 18 volt, 6.0 amp, Lithium Ion, clip in battery pack for the Pacvac Superpro Go & Velo Go.

Battery has an indicator showing power level.

These are sold individually but the machine needs two to operate.

108wh
un3480+3481

pacvac part number - BP001BP01A01

click here for safety data sheet

Numatic 270mm black Airobrush turbo tool suitable to fit any 32mm wand, rod or hose.

Numatic’s have always been powerful, but the AiroBrush takes carpet cleaning to the next level.

Same tool as the 909553 but without the box.

Previous part number(s): 601227/ 601226

click here for 216006

Non-original product

Suitable for Numatic products

Pack of 10 genuine Numatic pods for the NQ100 Numatic, Henry & Hetty Quick stick vacuum.

old part number 914592 and 916587 

Genuine Numatic graphite floor tool. Suitable to fit the NQ100 Numatic, Henry & Hetty Quick stick vacuum.

Genuine Numatic 206043 32-51mm cyclonic inlet connector

October 2023 - Numatic have made this item obsolete, with no replacement. 

Feel free to contact us and we can explain how to remove/ bypass the circuit board all together.

321990 Hi-Lo speed
PCB circuit board for Numatic Henry HVR200A and other Autosave models only.
This replaces the green 208100 board and comes with a wiring diagram.

revious part numbers 208100, 208428, 208429

Genuine Numatic 204060 3'' grey castor - for all Numatic 570/900/1800/2000 models.