Pack of 10 disposable bags for the Pacvac Superpro range.

Bags are a conical shape that fit perfectly over the grey filter dust bag and accommodate the Hypercone filter.

The use of bags is always recommended as not only do they collect any unwanted debris, the act as another level of air filtration which in turn protects the motor from finer dusts.

(These were formerly packed in 5's using part number AF101/ DUB019)

Pack of 10 disposable sms/ microfibre bags for the Pacvac Superpro range.

The bags are a conical shape that fit perfectly over the grey filter dust bag and accommodate the Hypercone filter and are a higher filtration than the standard paper dust bags. 

The use of bags is always recommended as not only do they collect any unwanted debris, the act as another level of air filtration which in turn protects the motor from finer dusts.

Single replacement 18 volt, 6.0 amp, Lithium Ion, clip in battery pack for the Pacvac Superpro Go & Velo Go.

Battery has an indicator showing power level.

These are sold individually but the machine needs two to operate.

108wh
un3480+3481

pacvac part number - BP001BP01A01

click here for safety data sheet

Dual port battery charger for the Pacvac battery powered machines.

It charges two of the clip in Pacvac BP001 6.0 amp batteries in 1 hour 45 minutes.

Charger is supplied with both a 13amp 3 pin British and 2 pin continental plug and lead with standard IEC plug the other end.

pacvac part number - BC001BC01A03

batteries sold separately

Genuine Pacvac Floor Tool. Compatible with any 32mm diameter vacuum cleaner wand or rod. Lightweight allowing easy manoeuvring for a thorough clean. For use on both low pile carpeted surfaces and hard floors. Branded Wessel tool.

Supplied as standard with both the Superpro & Velo Cord

• Compatible with any 32mm diameter vacuum cleaner wand/rod.

• Lightweight allowing easy manoeuvring for a thorough clean.

• For use on both low pile carpeted surfaces and hard floors.

• Branded Wessel tool.

Old Code: UA908W

• Compatible with any 32mm diameter vacuum cleaner wand/rod.

• Lightweight allowing easy manoeuvring for a thorough clean.

• For use on hard floors.

Genuine Pacvac 280mm Turbo Head Floor Tool suitable to fit any 32mm rod, hose or wand.

The turbo head floor tool is a 280mm wide attachment that connects to the vacuum cleaner via a 32mm connection. It is a non-powered unit that utilizes the suction and airflow of the vacuum cleaner to spin the bristles, effectively agitating dirt and debris for better pick up and a deeper clean of carpets. This product is a genuine spare part approved by Pacvac.

Genuine Pacvac 260mm combination floor tool suitable for the Velo range.

Genuine Pacvac 32mm Dusting Brush suitable for any 32mm wand or hose.

Genuine Pacvac 32mm Crevice Tool suitable to fit any 32mm hose or wand.

Genuine Pacvac 32mm Upholstery Tool suitable to fit any 32mm hose or wand.

Genuine Pacvac 32mm Wing Brush suitable to fit any 32mm wand, rod or hose.

Genuine Pacvac 32mm Long Dusting Brush suitable for the Pacvac range.

Genuine Pacvac 32mm Flexi Crevice Tool suitable to fit any 32mm wand, rod or hose.

Genuine Pacvac Superpro ActiveAir filter cartridge for the Superpro 700 series. 

99.99% filtration efficiency to 0.3uf. 

Old code - KC270

Genuine Pacvcac hypercone filter to fit the Pacvac Velo range.

The HEPA H13 pre-cone filter has a high filtration efficiency to improve air quality by removing even the smallest particles including dust, pollen, smoke, bacteria and mould particles from the air.

This snorkel-like cone filter allows consistent airflow through the vacuum cleaner as the dust bag fills, maintaining high levels of suction, prolonging the life of the motor and delivering high quality filtration.

Suitable for cleaning in areas where air quality is essential including schools, hospitality, childcare centers, vets, and aged care facilities.

This filter can also assist in improving air quality in places with high levels of air pollution, and where people may suffer from allergies and respiratory issues.

This HEPA Filter is compatible with Superpro 700 Backpack Vacuum, Superpro 700 Wispa

• Pacvac approved, genuine spare part.
• Pre-motor cone filter 196mm.
• Cone filter.
• EN1822 Certified and tested by GTT in 2022

Genuine Pacvac Velo H13 HEPA Filter Cartridge.

The HEPA H13 pre-cone filter has a high filtration efficiency to improve air quality by removing even the smallest particles including dust, pollen, smoke, bacteria and mould particles from the air.

This snorkel-like cone filter allows consistent airflow through the vacuum cleaner as the dust bag fills, maintaining high levels of suction, prolonging the life of the motor and delivering high quality filtration.

Suitable for cleaning in areas where air quality is essential including schools, hospitality, childcare centers, vets, and aged care facilities.

This filter can also assist in improving air quality in places with high levels of air pollution, and where people may suffer from allergies and respiratory issues.

This HEPA Filter is compatible with Velo Corded Backpack Vacuum

• Pacvac approved, genuine spare part.
• Cone filter.
• EN1822 Certified and tested by GTT in 2022

Genuine Pacvac Superpro 18 metre mains cable suitable for the Pacvac Superpro.

Cable has a right angled EU plug.

For Pacvac products, this extra long mains cable means you can reach much further without the need to unplug and move - more time vacuuming to get the job done faster!

See other Pacvac Spares and Accessories.

Genuine Pacvac Superpro 700 18 metre mains cable suitable for the Pacvac superpro 700.
Cable has a right angled IEC plug.
For Pacvac products, this extra long mains cable means you can reach much further without the need to unplug and move - more time vacuuming to get the job done faster!

See other Pacvac Spares and Accessories.

From July 2021 a cable holder will be sent with every new cable - please see here how to attach new pacvac cable holder

Old code - KC108ukIEC

Genuine Pacvac Velo 18 metre mains cable suitable for the Pacvac Velo Corded Vacuum.
Cable has a right angled IEC plug.
This extra long mains cable means you can reach much further without the need to unplug and move - more time vacuuming to get the job done faster!

See other Pacvac Spares and Accessories

Genuine Pacvac Superpro plastic cord restraint suitable for the Pacvac Superpro.

Old codes: KC268/ COR001

Genuine Pacvac chrome wands x2 for the Pacvac Superpro range.

Old code: KC9092

Genuine Pacvac plastic wands x2 for the Pacvac range

Genuine Pacvac Aluminium 920mm Telescopic Wand suitable for the Velo range.

Genuine Pacvac Wand wall mount suitable for all Pacvac vacuum wands.

Genuine Pacvac Hose suitable for Pacvac Superpro range - 1.2 metre length with screw cuff.

See our full range of Pacvac Spare Parts

An ideal accessory or replacement to add to your Pacvac

Old codes HOA001 & KC320