Pack of 10 disposable bags for the Pacvac Superpro range.

Bags are a conical shape that fit perfectly over the grey filter dust bag and accommodate the Hypercone filter.

The use of bags is always recommended as not only do they collect any unwanted debris, the act as another level of air filtration which in turn protects the motor from finer dusts.

(These were formerly packed in 5's using part number AF101/ DUB019)

Pack of 10 disposable sms/ microfibre bags for the Pacvac Superpro range.

The bags are a conical shape that fit perfectly over the grey filter dust bag and accommodate the Hypercone filter and are a higher filtration than the standard paper dust bags. 

The use of bags is always recommended as not only do they collect any unwanted debris, the act as another level of air filtration which in turn protects the motor from finer dusts.

Single replacement 18 volt, 6.0 amp, Lithium Ion, clip in battery pack for the Pacvac Superpro Go & Velo Go.

Battery has an indicator showing power level.

These are sold individually but the machine needs two to operate.

108wh
un3480+3481

pacvac part number - BP001BP01A01

click here for safety data sheet

Dual port battery charger for the Pacvac battery powered machines.

It charges two of the clip in Pacvac BP001 6.0 amp batteries in 1 hour 45 minutes.

Charger is supplied with both a 13amp 3 pin British and 2 pin continental plug and lead with standard IEC plug the other end.

pacvac part number - BC001BC01A03

batteries sold separately

Genuine Pacvac Floor Tool. Compatible with any 32mm diameter vacuum cleaner wand or rod. Lightweight allowing easy manoeuvring for a thorough clean. For use on both low pile carpeted surfaces and hard floors. Branded Wessel tool.

Supplied as standard with both the Superpro & Velo Cord

• Compatible with any 32mm diameter vacuum cleaner wand/rod.

• Lightweight allowing easy manoeuvring for a thorough clean.

• For use on both low pile carpeted surfaces and hard floors.

• Branded Wessel tool.

Old Code: UA908W

• Compatible with any 32mm diameter vacuum cleaner wand/rod.

• Lightweight allowing easy manoeuvring for a thorough clean.

• For use on hard floors.

Genuine Pacvac 280mm Turbo Head Floor Tool suitable to fit any 32mm rod, hose or wand.

The turbo head floor tool is a 280mm wide attachment that connects to the vacuum cleaner via a 32mm connection. It is a non-powered unit that utilizes the suction and airflow of the vacuum cleaner to spin the bristles, effectively agitating dirt and debris for better pick up and a deeper clean of carpets. This product is a genuine spare part approved by Pacvac.

Genuine Pacvac 32mm Dusting Brush suitable for any 32mm wand or hose.

Genuine Pacvac 32mm Crevice Tool suitable to fit any 32mm hose or wand.

Genuine Pacvac 32mm Upholstery Tool suitable to fit any 32mm hose or wand.

Genuine Pacvac 32mm Wing Brush suitable to fit any 32mm wand, rod or hose.

Genuine Pacvac 32mm Long Dusting Brush suitable for the Pacvac range.

Genuine Pacvac 32mm Flexi Crevice Tool suitable to fit any 32mm wand, rod or hose.

Genuine Pacvac Hose suitable for Pacvac Superpro range - 1.2 metre length with screw cuff.

See our full range of Pacvac Spare Parts

An ideal accessory or replacement to add to your Pacvac

Old codes HOA001 & KC320

Genuine Pacvac chrome wands x2 for the Pacvac Superpro range.

Old code: KC9092

Genuine Pacvac plastic wands x2 for the Pacvac range

Genuine Pacvac Superpro ActiveAir filter cartridge for the Superpro 700 series. 

99.99% filtration efficiency to 0.3uf. 

Old code - KC270

Service Kit comprises of;

DUB003 SMS Main Filter - Grey

DUB019 Paper Bags (pack of 10)

FIL001 Pre Motor Cartridge Filter 

FIL004 - Exhaust Filter

CAG001 - Exhaust Filter Cage

Genuine Pacvac Wand tool holder suitable for most Pacvac vacuum wands and accessories.

Genuine Pacvac Wand wall mount suitable for all Pacvac vacuum wands.

Genuine Pacvac Ecoharness to fit the Superpro and Superpro Go.

this does not include the frame - if you want the frame then you need to order SEK018

With 3 levels of height adjustability, thicker padding, breathable mesh and a cord holder, the Ecoharness is designed with the user in mind. It's easily adjustable to whoever is using the machine, plus it's made from 50% recycled plastic.

Genuine Pacvac toggle latch for the Pacvac Superpro vacuum cleaner range.

Old Code: KC131

Pacvac Ecoharness – Comfort Meets Sustainability

The Ecoharness is expertly crafted from a blend of premium materials and sustainable recycled textiles, offering a harness that is comfortable, supportive, and tailored for a personalised fit.

With at least 50% rPet (recycled polyethylene terephthalate) content, this harness incorporates recycled plastic water bottles—reflecting Pacvac’s ongoing commitment to environmentally conscious product innovation.

Designed with user comfort in mind, the Ecoharness features a three-point height adjustment system, allowing you to customise how the vacuum sits on your back for optimal fit and support. Thicker padding, load-bearing straps, and a breathable mesh back panel work together to enhance comfort and ventilation during use.

What's Included:

• 1 x Ecoharness

• 1 x Ecoframe

• 1 x Comfort Pad

• 1 x Cord Holder

• 1 x Carry Handle

Compatible with Pacvac Superpro & Superpro Go backpack vacuum models.

Features:

• Adjustable height, straps, and waistband

• Enhanced padding for comfort

• Integrated cord management

• Ventilated mesh backing

• Genuine Pacvac spare part